CakeFest 2024: The Official CakePHP Conference

preg_replace

(PHP 4, PHP 5, PHP 7, PHP 8)

preg_replaceRealiza uma pesquisa por uma expressão regular e substitui

Descrição

preg_replace(
    string|array $pattern,
    string|array $replacement,
    string|array $subject,
    int $limit = -1,
    int &$count = null
): string|array|null

Pesquisa subject por correspondências a pattern e substitui-as por replacement.

Para procurar correspondência por uma string exata, e não por um padrão, considere usar str_replace() ou str_ireplace() no lugar desta função.

Parâmetros

pattern

O padrão a ser pesquisado. Pode ser uma string ou um array com strings.

Diversos modificadores PCRE também estão disponíveis.

replacement

A string ou array com strings para substituir. Se este parâmetro é uma string e o parâmetro pattern é um array, todos patterns vão ser substituídos por esta string. Se ambos pattern e replacement parâmetros são arrays, cada pattern vai ser substituído pelo seureplacement correspondente. Se houver menos elementos no replacement array do que no pattern array, qualquer pattern extra será substituído por uma string vazia.

replacement pode conter referências na forma \n ou $n, com a última forma sendo a preferível. Cada referência desse tipo será substituída pelo texto capturado pelo n-ésimo padrão entre parentêses. n pode ser de 0 to 99, e \0 ou $0 referem-se ao texto correspondente ao padrão inteiro. Parênteses de abertura são contados da esquerda para direita (iniciando em 1) para obter o número do sub-padrão de captura. Note que barra invertida em strings literais podem precisar ser escapados.

Quando se trabalha com uma padrão de substituição, onde a referência passada é imediatamente seguida por outro número (isto é, inserido um número literal imediatamente após um padrão correspondente), não se pode usar a habitual notação \1 para a referência passada. \11, por exemplo, iria confundir a função preg_replace() pois ela não saberá se o desejado é a referência \1 seguida por um literal 1, ou a referência \11 seguida por nada. Neste caso, a solução é usar ${1}1. Isto cria uma referência $1 isolada, deixando o 1 como um literal.

Ao usar o modificador e que está defasado, esta função escapa alguns caracteres (nomeadamente ', ", \ e NULL) nas strings que substituem as referências passadas. Isto é feito para garantir que nenhum erro de sintaxe surja de uso de referência passada com aspas simples ou duplas (por exemplo, 'strlen(\'$1\')+strlen("$2")'). Certifique-se de estar ciente da sintaxe string do PHP para ter uma visão exata de como será a string interpretada.

subject

String ou um array com strings para pesquisar e substituir.

Se subject é um array, então a pesquisa e a substituição são executadas em cada entrada do subject, e o valor de retorno é um array também.

Se o array subject for associativo, as chaves são preservadas no valor de retorno.

limit

O máximo possível de substituições para cada padrão em cada string de subject. O padrão é -1 (sem limite).

count

Se especificada, essa variável será preenchida com o número de substiuições realizadas.

Valor Retornado

preg_replace() retorna um array se o parâmetro subject é um array, caso contrário retorna uma string.

Se correspondências forem encontradas, o novo subject será devolvido, caso contrário subject será devolvido inalterado ou null se um erro ocorreu.

Erros/Exceções

Usar o modificador "\e" é um erro; um erro de nível E_WARNING é emitido neste caso.

Se o padrão de expressão regular passado não for compilado para uma expressão regular válida, um E_WARNING será emitido.

Exemplos

Exemplo #1 Usando referências passadas seguidas por literais numéricos

<?php
$string
= 'April 15, 2003';
$pattern = '/(\w+) (\d+), (\d+)/i';
$replacement = '${1}1,$3';
echo
preg_replace($pattern, $replacement, $string);
?>

O exemplo acima produzirá:

April1,2003

Exemplo #2 Usando array indexados com preg_replace()

<?php
$string
= 'The quick brown fox jumped over the lazy dog.';
$patterns = array();
$patterns[0] = '/quick/';
$patterns[1] = '/brown/';
$patterns[2] = '/fox/';
$replacements = array();
$replacements[2] = 'bear';
$replacements[1] = 'black';
$replacements[0] = 'slow';
echo
preg_replace($patterns, $replacements, $string);
?>

O exemplo acima produzirá:

The bear black slow jumped over the lazy dog.

Ao ordenar padrões e substituições com ksort, obtém-se o desejado.

<?php
ksort
($patterns);
ksort($replacements);
echo
preg_replace($patterns, $replacements, $string);
?>

O exemplo acima produzirá:

The slow black bear jumped over the lazy dog.

Exemplo #3 Substituindo vários valores

<?php
$patterns
= array ('/(19|20)(\d{2})-(\d{1,2})-(\d{1,2})/',
'/^\s*{(\w+)}\s*=/');
$replace = array ('\3/\4/\1\2', '$\1 =');
echo
preg_replace($patterns, $replace, '{startDate} = 1999-5-27');
?>

O exemplo acima produzirá:

$startDate = 5/27/1999

Exemplo #4 Removendo espaços

Este exemplo retira o excesso de espaçoes em branco de uma string.

<?php
$str
= 'foo o';
$str = preg_replace('/\s\s+/', ' ', $str);
// This will be 'foo o' now
echo $str;
?>

Exemplo #5 Usando o parâmetro count

<?php
$count
= 0;

echo
preg_replace(array('/\d/', '/\s/'), '*', 'xp 4 to', -1 , $count);
echo
$count; //3
?>

O exemplo acima produzirá:

xp***to
3

Notas

Nota:

Ao usar arrays com pattern e replacement, as chaves são processadas na ordem que aparecem no array. Isto não é necessariamente o mesmo que a ordem de índice numérico. Se é feito o uso dos índices para indentificar qual pattern deve ser substituído por qual replacement, é necessário executar a função ksort() em cada array antes de chamar a função preg_replace().

Nota:

Quando ambos pattern e replacement forem arrays, as regras de correspondência irão operar sequancialmente. Isto é, o segundo par pattern/replacement irá operar na string que resulta do primeiro par pattern/replacement, e não da string original. Se for desejado simular substituições operando em paralelo, como inversão de dois valores, substitua um padrão por uma referência intermediária, e então em um par posterior substitua a referência intermediária pelo substituto desejado.

<?php
$p
= array('/a/', '/b/', '/c/');
$r = array('b', 'c', 'd');
print_r(preg_replace($p, $r, 'a'));
// prints d
?>

Veja Também

add a note

User Contributed Notes 10 notes

up
770
arkani at iol dot pt
15 years ago
Because i search a lot 4 this:

The following should be escaped if you are trying to match that character

\ ^ . $ | ( ) [ ]
* + ? { } ,

Special Character Definitions
\ Quote the next metacharacter
^ Match the beginning of the line
. Match any character (except newline)
$ Match the end of the line (or before newline at the end)
| Alternation
() Grouping
[] Character class
* Match 0 or more times
+ Match 1 or more times
? Match 1 or 0 times
{n} Match exactly n times
{n,} Match at least n times
{n,m} Match at least n but not more than m times
More Special Character Stuff
\t tab (HT, TAB)
\n newline (LF, NL)
\r return (CR)
\f form feed (FF)
\a alarm (bell) (BEL)
\e escape (think troff) (ESC)
\033 octal char (think of a PDP-11)
\x1B hex char
\c[ control char
\l lowercase next char (think vi)
\u uppercase next char (think vi)
\L lowercase till \E (think vi)
\U uppercase till \E (think vi)
\E end case modification (think vi)
\Q quote (disable) pattern metacharacters till \E
Even More Special Characters
\w Match a "word" character (alphanumeric plus "_")
\W Match a non-word character
\s Match a whitespace character
\S Match a non-whitespace character
\d Match a digit character
\D Match a non-digit character
\b Match a word boundary
\B Match a non-(word boundary)
\A Match only at beginning of string
\Z Match only at end of string, or before newline at the end
\z Match only at end of string
\G Match only where previous m//g left off (works only with /g)
up
4
nik at rolls dot cc
11 years ago
To split Pascal/CamelCase into Title Case (for example, converting descriptive class names for use in human-readable frontends), you can use the below function:

<?php
function expandCamelCase($source) {
return
preg_replace('/(?<!^)([A-Z][a-z]|(?<=[a-z])[^a-z]|(?<=[A-Z])[0-9_])/', ' $1', $source);
}
?>

Before:
ExpandCamelCaseAPIDescriptorPHP5_3_4Version3_21Beta
After:
Expand Camel Case API Descriptor PHP 5_3_4 Version 3_21 Beta
up
2
ismith at nojunk dot motorola dot com
17 years ago
Be aware that when using the "/u" modifier, if your input text contains any bad UTF-8 code sequences, then preg_replace will return an empty string, regardless of whether there were any matches.

This is due to the PCRE library returning an error code if the string contains bad UTF-8.
up
1
bublifuk at mailinator dot com
5 years ago
A delimiter can be any ASCII non-alphanumeric, non-backslash, non-whitespace character: !"#$%&'*+,./:;=?@^_`|~- and ({[<>]})
up
1
Anonymous
6 days ago
You can only use numeric backreferences in the replacement string, but not named ones:
<?php
echo preg_replace('#(\d+)#', '\1 $1 ${1}', '123');
// 123 123 123
echo preg_replace('#(?<digits>\d+)#', '\digits $digits ${digits}', '123');
// \digits $digits ${digits}
?>

To use named backreferences, you have to use preg_replace_callback:
<?php
echo preg_replace_callback('#(?<digits>\d+)#', function( $m ){
return
"$m[1] $m[digits] {$m['digits']}";
},
'123');
// 123 123 123

echo preg_replace_callback('#(?<digits>\d+)#', fn($m) => "$m[1] $m[digits] {$m['digits']}", '123');
// 123 123 123
?>

See https://bugs.php.net/bug.php?id=81469
up
0
me at perochak dot com
13 years ago
If you would like to remove a tag along with the text inside it then use the following code.

<?php
preg_replace
('/(<tag>.+?)+(<\/tag>)/i', '', $string);
?>

example
<?php $string='<span class="normalprice">55 PKR</span>'; ?>

<?php
$string
= preg_replace('/(<span class="normalprice">.+?)+(<\/span>)/i', '', $string);
?>

This will results a null or empty string.

<?php
$string
='My String <span class="normalprice">55 PKR</span>';

$string = preg_replace('/(<span class="normalprice">.+?)+(<\/span>)/i', '', $string);
?>

This will results a " My String"
up
0
php-comments-REMOVE dot ME at dotancohen dot com
16 years ago
Below is a function for converting Hebrew final characters to their
normal equivelants should they appear in the middle of a word.
The /b argument does not treat Hebrew letters as part of a word,
so I had to work around that limitation.

<?php

$text
="עברית מבולגנת";

function
hebrewNotWordEndSwitch ($from, $to, $text) {
$text=
preg_replace('/'.$from.'([א-ת])/u','$2'.$to.'$1',$text);
return
$text;
}

do {
$text_before=$text;
$text=hebrewNotWordEndSwitch("ך","כ",$text);
$text=hebrewNotWordEndSwitch("ם","מ",$text);
$text=hebrewNotWordEndSwitch("ן","נ",$text);
$text=hebrewNotWordEndSwitch("ף","פ",$text);
$text=hebrewNotWordEndSwitch("ץ","צ",$text);
} while (
$text_before!=$text );

print
$text; // עברית מסודרת!

?>

The do-while is necessary for multiple instances of letters, such
as "אנני" which would start off as "אןןי". Note that there's still the
problem of acronyms with gershiim but that's not a difficult one
to solve. The code is in use at http://gibberish.co.il which you can
use to translate wrongly-encoded Hebrew, transliterize, and some
other Hebrew-related functions.

To ensure that there will be no regular characters at the end of a
word, just convert all regular characters to their final forms, then
run this function. Enjoy!
up
0
sternkinder at gmail dot com
16 years ago
From what I can see, the problem is, that if you go straight and substitute all 'A's wit 'T's you can't tell for sure which 'T's to substitute with 'A's afterwards. This can be for instance solved by simply replacing all 'A's by another character (for instance '_' or whatever you like), then replacing all 'T's by 'A's, and then replacing all '_'s (or whatever character you chose) by 'A's:

<?php
$dna
= "AGTCTGCCCTAG";
echo
str_replace(array("A","G","C","T","_","-"), array("_","-","G","A","T","C"), $dna); //output will be TCAGACGGGATC
?>

Although I don't know how transliteration in perl works (though I remember that is kind of similar to the UNIX command "tr") I would suggest following function for "switching" single chars:

<?php
function switch_chars($subject,$switch_table,$unused_char="_") {
foreach (
$switch_table as $_1 => $_2 ) {
$subject = str_replace($_1,$unused_char,$subject);
$subject = str_replace($_2,$_1,$subject);
$subject = str_replace($unused_char,$_2,$subject);
}
return
$subject;
}

echo
switch_chars("AGTCTGCCCTAG", array("A"=>"T","G"=>"C")); //output will be TCAGACGGGATC
?>
up
-2
razvan_bc at yahoo dot com
1 year ago
How to replace all comments inside code without remove crln = \r\n or cr \r each line?

<?php
$txt_target
=<<<t1
this;// dsdsds
nope

/*
ok
*/
is;huge
/*text bla*/
/*bla*/

t1;

/*
=======================================================================
expected result:
=======================================================================
this;
nope

is;huge
=======================================================================
visualizing in a hex viewer .. to_check_with_a_hex_viewer.txt ...
t h i s ; LF TAB n o p e CR LF CR LF i s ; h u g e CR LF
74 68 69 73 3b 0a 09 6e 6f 70 65 0d 0a 0d 0a 69 73 3b 68 75 67 65 0d 0a
I used F3 (viewer + options 3: hex) in mythical TOTAL COMMANDER!
=======================================================================
*/

echo '<hr><pre>';
echo
$txt_target;
echo
'</pre>';

// a single line '//' comments
$txt_target = preg_replace('![ \t]*//.*[ \t]*!', '', $txt_target);

// /* comment */
$txt_target = preg_replace('/\/\*([^\/]*)\*\/(\s+)/smi', '', $txt_target);
echo
'<hr><pre>';
echo
$txt_target;
echo
'</pre><hr>';

file_put_contents('to_check_with_a_hex_viewer.txt',$txt_target);

?>
up
-2
mail at johanvandemerwe dot nl
4 years ago
Sample for replacing bracketed short-codes

The used short-codes are purely used for educational purposes for they could be shorter as in 'italic' to 'i' or 'bold' to 'b'.

Sample text
----
This sample shows how to have [italic]italic[/italic], [bold]bold[/bold] and [underline]underlined[/underline] and [strikethrough]striked[/striketrhough] text.

with this function:

<?php
function textDecoration($html)
{
$patterns = [
'/\[(italic)\].*?\[\/\1\] ?/',
'/\[(bold)\].*?\[\/\1\] ?/',
'/\[(underline)\].*?\[\/\1\] ?/'
];

$replacements = [
'<i>$1</i>',
'<strong>$1</strong>',
'<u>$1</u>'
];

return
preg_replace($patterns, $replacements, $html);
}

$html = textDecoration($html);

echo
$html; // or return
?>

results in:
----
This sample shows how to have <i>italic</i>, <b>bold</b> and <u>underlined</u> and [strikethrough]striked[/striketrhough] text.

Notice!
There is no [strikethrough]striked[/striketrhough] fallback in the patterns and replacements array
To Top