CakeFest 2024: The Official CakePHP Conference

oci_connect

(PHP 5, PHP 7, PHP 8, PECL OCI8 >= 1.1.0)

oci_connectУстанавливает соединение с базой данных Oracle

Описание

oci_connect(
    string $username,
    string $password,
    ?string $connection_string = null,
    string $encoding = "",
    int $session_mode = OCI_DEFAULT
): resource|false

Возвращает идентификатор соединения, который используется большинством функций данного модуля.

Для повышения производительности большинство приложений должны использовать постоянные соединения с помощью oci_pconnect() вместо oci_connect(). Смотрите Управление соединением для более детальной информации по управлению соединениями и создании пулов подключений.

Второй и последующие вызовы функции oci_connect() с теми же параметрами вернут идентификатор уже открытого соединения. Это означает, что транзакции используют одно и то же базовое соединение с базой данных. При необходимости разделения транзакций рекомендуется использовать функцию oci_new_connect().

Список параметров

username

Имя пользователя Oracle.

password

Пароль username.

connection_string

Содержит экземпляр Oracle для подключения. Это может быть » Easy Connect string, или Connect Name из файла tnsnames.ora, или имя локального экземпляра Oracle.

Если не указано отдельно или null, PHP использует переменные окружения, такие как TWO_TASK (на Linux) или LOCAL (на Windows) и ORACLE_SID для определения экземпляра Oracle для соединения.

Для использования метода Easy Connect, PHP должен быть слинкован с клиентскими библиотеками версии Oracle 10g или старше. Easy Connect string для Oracle 10g принимает следующую форму: [//]host_name[:port][/service_name]. Начиная с Oracle 11g синтаксис таков: [//]host_name[:port][/service_name][:server_type][/instance_name]. В Oracle 19c были введены дополнительные параметры, включая настройки времени ожидания и проверки активности. Обратитесь к документации Oracle. Названия служб могут быть определены с помощью запуска Oracle утилиты lsnrctl status на сервере базы данных.

Файл tnsnames.ora может находиться в поисковом пути Oracle Net, который включает /your/path/to/instantclient/network/admin, $ORACLE_HOME/network/admin и /etc. В качестве альтернативного варианта можно установить TNS_ADMIN таким образом, чтобы путь $TNS_ADMIN/tnsnames.ora был читаемым. Убедитесь, что веб-сервер имеет доступ к этому файлу.

encoding

Определяет кодировку, которую будут использовать клиентские библиотеки Oracle. Эта кодировка не обязательно должна совпадать с кодировкой, используемой в самой базе данных. Если она не совпадает, Oracle сделает всё возможное для конвертирования данных из- и в эту кодировку. В зависимости от используемых кодировок это может не всегда давать приемлемые результаты. Преобразование также создаёт некоторые дополнительные временные затраты.

Если кодировка не указана, клиентские библиотеки Oracle будут определять её из переменной окружения NLS_LANG.

Передача этого параметра может уменьшить время затрачиваемое на соединение.

session_mode

Этот параметр доступен начиная с версии PHP 5 (PECL OCI8 1.1) и принимает следующие значения: OCI_DEFAULT, OCI_SYSOPER и OCI_SYSDBA. Если указали OCI_SYSOPER или OCI_SYSDBA, функция попытается установить привилегированное соединение через внешние данные авторизации. По умолчанию привилегированные соединения отключены. Чтобы их включить, устанавливают oci8.privileged_connect в On.

В версии PHP 5.3 (PECL OCI8 1.3.4) появилась константа OCI_CRED_EXT как значение режима. Этот режим говорит Oracle использовать внешнюю аутентификацию или аутентификацию операционной системы, которую требуется настроить в базе данных. Флаг OCI_CRED_EXT разрешается использовать только с именем пользователя "/" и пустым паролем. Опиция oci8.privileged_connect принимает значение On или Off.

Режим OCI_CRED_EXT разрешается объединять с режимами OCI_SYSOPER и OCI_SYSDBA.

Режим OCI_CRED_EXT не поддерживается в Windows по соображениям безопасности.

Возвращаемые значения

Возвращает идентификатор соединения или false в случае возникновения ошибки.

Список изменений

Версия Описание
8.0.0, PECL OCI8 3.0.0 connection_string теперь допускает значение null.

Примеры

Пример #1 Пример использования oci_connect() с синтаксисом Easy Connect

<?php

// Подключается к XE сервису (т.е. к базе данных) на "localhost"
$conn = oci_connect('hr', 'welcome', 'localhost/XE');
if (!
$conn) {
$e = oci_error();
trigger_error(htmlentities($e['message'], ENT_QUOTES), E_USER_ERROR);
}

$stid = oci_parse($conn, 'SELECT * FROM employees');
oci_execute($stid);

echo
"<table border='1'>\n";
while (
$row = oci_fetch_array($stid, OCI_ASSOC+OCI_RETURN_NULLS)) {
echo
"<tr>\n";
foreach (
$row as $item) {
echo
" <td>" . ($item !== null ? htmlentities($item, ENT_QUOTES) : "") . "</td>\n";
}
echo
"</tr>\n";
}
echo
"</table>\n";

?>

Пример #2 Пример использования oci_connect() используя имя Network Connect

<?php

// Соединяется с базой данных MYDB описанной в файле tnsnames.ora,
// Пример записи в tnsnames.ora для MYDB:
// MYDB =
// (DESCRIPTION =
// (ADDRESS = (PROTOCOL = TCP)(HOST = mymachine.oracle.com)(PORT = 1521))
// (CONNECT_DATA =
// (SERVER = DEDICATED)
// (SERVICE_NAME = XE)
// )
// )

$conn = oci_connect('hr', 'welcome', 'MYDB');
if (!
$conn) {
$e = oci_error();
trigger_error(htmlentities($e['message'], ENT_QUOTES), E_USER_ERROR);
}

$stid = oci_parse($conn, 'SELECT * FROM employees');
oci_execute($stid);

echo
"<table border='1'>\n";
while (
$row = oci_fetch_array($stid, OCI_ASSOC+OCI_RETURN_NULLS)) {
echo
"<tr>\n";
foreach (
$row as $item) {
echo
" <td>" . ($item !== null ? htmlentities($item, ENT_QUOTES) : "") . "</td>\n";
}
echo
"</tr>\n";
}
echo
"</table>\n";

?>

Пример #3 Пример использования oci_connect() с использованием определённого набора символов

<?php

$conn
= oci_connect('hr', 'welcome', 'localhost/XE', 'AL32UTF8');
if (!
$conn) {
$e = oci_error();
trigger_error(htmlentities($e['message'], ENT_QUOTES), E_USER_ERROR);
}

$stid = oci_parse($conn, 'SELECT * FROM employees');
oci_execute($stid);

echo
"<table border='1'>\n";
while (
$row = oci_fetch_array($stid, OCI_ASSOC+OCI_RETURN_NULLS)) {
echo
"<tr>\n";
foreach (
$row as $item) {
echo
" <td>" . ($item !== null ? htmlentities($item, ENT_QUOTES) : "") . "</td>\n";
}
echo
"</tr>\n";
}
echo
"</table>\n";

?>

Пример #4 Пример использования многократных вызовов oci_connect()

<?php

$c1
= oci_connect("hr", "welcome", 'localhost/XE');
$c2 = oci_connect("hr", "welcome", 'localhost/XE');

// $c1 и $c2 содержат одинаковый PHP id ресурса, что означает, что
// они используют одинаковое базовое соединение
echo "c1 is $c1<br>\n";
echo
"c2 is $c2<br>\n";

function
create_table($conn)
{
$stmt = oci_parse($conn, "create table hallo (test varchar2(64))");
oci_execute($stmt);
echo
"Created table<br>\n";
}

function
drop_table($conn)
{
$stmt = oci_parse($conn, "drop table hallo");
oci_execute($stmt);
echo
"Dropped table<br>\n";
}

function
insert_data($connname, $conn)
{
$stmt = oci_parse($conn, "insert into hallo
values(to_char(sysdate,'DD-MON-YY HH24:MI:SS'))"
);
oci_execute($stmt, OCI_DEFAULT);
echo
"$connname inserted row without committing<br>\n";
}

function
rollback($connname, $conn)
{
oci_rollback($conn);
echo
"$connname rollback<br>\n";
}

function
select_data($connname, $conn)
{
$stmt = oci_parse($conn, "select * from hallo");
oci_execute($stmt, OCI_DEFAULT);
echo
"$connname ----selecting<br>\n";
while (
oci_fetch($stmt)) {
echo
" " . oci_result($stmt, "TEST") . "<br>\n";
}
echo
"$connname ----done<br>\n";
}

create_table($c1);

insert_data('c1', $c1); // Вставить строку используя c1
sleep(2); // остановиться для записи другой временной метки для следующей строки
insert_data('c2', $c2); // Вставить строку используя c2

select_data('c1', $c1); // Возврат результата обоих вставок
select_data('c2', $c2); // Возврат результата обоих вставок

rollback('c1', $c1); // Откат используя c1

select_data('c1', $c1); // Откат был произведён для обоих вставок
select_data('c2', $c2);

drop_table($c1);

// Закрытие одного из соединений делает переменную PHP недоступной, но
// другие могут быть использованы
oci_close($c1);
echo
"c1 is $c1<br>\n";
echo
"c2 is $c2<br>\n";


// Вывод is:
// c1 is Resource id #5
// c2 is Resource id #5
// Created table
// c1 inserted row without committing
// c2 inserted row without committing
// c1 ----selecting
// 09-DEC-09 12:14:43
// 09-DEC-09 12:14:45
// c1 ----done
// c2 ----selecting
// 09-DEC-09 12:14:43
// 09-DEC-09 12:14:45
// c2 ----done
// c1 rollback
// c1 ----selecting
// c1 ----done
// c2 ----selecting
// c2 ----done
// Dropped table
// c1 is
// c2 is Resource id #5

?>

Примечания

Замечание:

Некорректно установленный или настроенный модуль OCI8 будет часто сообщать о проблемах соединения или ошибках. Смотрите Установка/Настройка для решения проблем.

Смотрите также

  • oci_pconnect() - Устанавливает постоянное соединение с сервером Oracle
  • oci_new_connect() - Устанавливает новое соединение с сервером Oracle
  • oci_close() - Закрывает соединение с сервером Oracle

add a note

User Contributed Notes 12 notes

up
10
M0no at ethonfusino dot com
21 years ago
If your oracle database is on a remote system within your local network and you don't want to worry about the tnsnames file you can try this.

$db = "(DESCRIPTION=(ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.XX.XXX)(PORT = 1521)))(CONNECT_DATA=(SID=XXXX)))";

$c1 = ocilogon("name","password",$db);

Hope this helps someone.
up
5
Leandro da Cunha Campos
14 years ago
ONE ALTERNATIVE OF CONNECT IN ORACLE RAC "Real Application Clusters"

<?php
$dbstr
="(DESCRIPTION =(ADDRESS = (PROTOCOL = TCP)(HOST =ip1)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = banco)
(INSTANCE_NAME = banco1)))"
;

$dbstr1 ="(DESCRIPTION =(ADDRESS = (PROTOCOL = TCP)(HOST =ip2)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = banco)
(INSTANCE_NAME = banco2)))"
;

if(!@(
$conn = oci_connect('user','password',$dbstr1)))
{
$conn = oci_connect('user','password',$dbstr) or die (ocierror()); }
?>
up
2
sixd at php dot net
15 years ago
If you want to specify a connection timeout in case there is network problem, you can edit the client side (e.g. PHP side) sqlnet.ora file and set SQLNET.OUTBOUND_CONNECT_TIMEOUT. This sets the upper time limit for establishing a connection right through to the DB, including the time for attempts to connect to other services. It is available from Oracle 10.2.0.3 onwards.

In Oracle 11.1, a slightly lighter-weight solution TCP.CONNECT_TIMEOUT was introduced. It also is a sqlnet.ora parameter. It bounds just the TCP connection establishment time, which is mostly where connection problem are seen.

The client sqlnet.ora file should be put in the same directory as the tnsnames.ora file.
up
2
sebastien.barbieri _at_ gmail dot com
17 years ago
When you are using Oracle 9.2+ I would say that you MUST use the CHARSET parameter.

Of course, you will not notice it until there is accented character... so just specify it and you will avoid a big headache.

So for example here is our Oracle internal conf:
select * from nls_database_parameters;

PARAMETER VALUE
------------------------------ ----------------------------------------

NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_ISO_CURRENCY AMERICA
NLS_CHARACTERSET WE8ISO8859P15


And there our oci_connect call:

$dbch=ocilogon($user,$pass,$connectString,"WE8ISO8859P15");

Without that, you will get question mark (inversed), squares… instead of most accented character.

Don’t forget to use that for writing as well as for reading.
up
1
drew dot carmichael at gmail dot com
14 years ago
When using the OCI_CRED_EXT in php
if the ENV $ORACLE_SID is set the DB does not need to be specified explicitly and the connection will fail unless you provide a NULL DB value when creating the connection.

The $ORACLE_SID trumps the TNS name look up for the connection. So even a manual connection string in the DB parameter will fail.

So when the $ORACLE_SID Env is set a NULL passed instead of the DB name connects successfully.

Hope this saves some hair pulling when moving to %.3 and OS Authentications
up
1
Jonathon Robinson
13 years ago
Regarding the following statement in the documentation:
"The second and subsequent calls to oci_connect() with the same parameters will return the connection handle returned from the first call."

There's one caveat here. Subsequent calls to oci_connect() will only return the same connection handle as the first call as long as a reference is held to the original handle.

For example, the following code will generate *one* connection handle:

<?php
$dbh
= oci_connect($username, $password, $conn_info);
// Do stuff
$dbh = oci_connect$username, $password, $conn_info);
// Do more stuff

The follow code will generate *two* connection handles:
getData();
// Do stuff
getData();
// Do more stuff

getData() {
$dbh = oci_connect($username, $password, $conn_info);
// Do stuff
}
?>

This is the result of PHP garbage collecting the handle at the end of the method scope.

If you want to isolate your DB layer through function calls but still want to leverage the fact that oci_connect can return the same handle, just keep a reference to the handle like so:

<?php
getData
($username, $password, $conn_info) {
$dbh = oci_connect($username, $password, $conn_info);
$key = hash('md5', "$username|$password|$conn_info");
$GLOBALS[$key] = $dbh;
// Do stuff
}
?>

I originally logged this as a bug but apparently this is the expected behaviour, likely because oci_close($dbh) just calls unset($dbh).
up
0
blake dot lewis at gmail dot com
11 years ago
Using ldap for Oracle name resolution:

The web server will need the environmental variable TNS_ADMIN='Directory of tnsname.ora' unless the default location is used. I use '/etc/tns_admin'. Confirm using the phpinfo().

There are three files needed in the TNS_ADMIN location: tnsnames.ora, sqlnet.ora and ldap.ora. If you are only using ldap, tnsnames.ora is not needed.

To sqlnet.ora add:
NAMES.DIRECTORY_PATH=(TNSNAMES,LDAP)

To ldap.ora add:
DIRECTORY_SERVERS=(ldap_server_fqdn:port)
DEFAULT_ADMIN_CONTEXT=""
DIRECTORY_SERVER_TYPE=OID

For a quick and dirty ldap tnsnames server use tnsManager by Dave Berry. Oracle OID or Openldap can used, but are complicated to setup. tnsManager is a no brainer. The quick part: give it a tnsnames.ora file and start it up. The dirty parts: I can't get Toad and SQLDeveloper to work with it, it ignores the domain and it is no longer being maintained.

The order of values in NAMES.DIRECTORY_PATH in sqlnet.ora determines which look up 'adapter' is used, in this case it is tnsnames.ora file and then ldap. I use ldap for general consumption and tnsnames.ora file to override ldap or entries that are not for general consumption.

If you have the full Oracle client you have tnsping. 'tnsping ORACLE_SID' will tell you what adapter you are using: 'Used LDAP adapter to resolve the alias'.

<?php
echo system("/PATH/tnsping ".$ORACLE_SID." 2>&1")."<br />";
echo
'TNS_ADMIN='.getenv('TNS_ADMIN');
?>

ISSUE:
If connecting with only ORACLE_SID and not ORACLE_SID.DB_DOMAIN, the value of NAMES.DEFAULT_DOMAIN from sqlnet.ora is appended, then for some reason PHP tries the HOSTNAME adapter, and if the database name resolves in DNS, it will fail connecting using the database name as the hostname, because neither SID nor SERVICE_NAME are defined.
If using tnsManager append '.ANY_DOMAIN' to $ORACLE_SID to hack around the issue above.

I have tested with:
11.1.0.7 full client and PHP 5.1.6
11.2.0.2 full client and PHP 5.4.11

I have heard that LDAP lookup does not work with older instantclients.
up
-4
ben at onshop dot co dot uk
18 years ago
There is a useful solution to the problem of securing connection information in the PHP Cookbook (O'Reilly) by David Sklar and Adam Trachtenberg. They propose using 'SetEnv' in the Apache configuration and then accessing the values from within a script using $_SERVER.

Unfortunately using the 'SetEnv' solution exposes your connection information to all users of that virtual host. If they run phpinfo.php or display $_SERVER, I found that they will see the password from any file under the root of that virtual host.

To restrict exposure to a particular directory or specific file:

1. First put an 'Include' to the secret file in httpd.conf. For example:

Include "/web/private/secret.txt"

2. In the password file, use the 'SetEnvIf' directive to enable the Environment variables by directory only or within a specific file. For example:

- For all files in the directory:

SetEnvIf Request_URI "/path/to/my/directory" ORACLE_PASS=5gHj790j

- For a specific file in the directory

SetEnvIf Request_URI "/path/to/my/directory/connection.oracle.php" ORACLE_PASS=5gHj790j
up
-5
blake dot lewis at gmail dot com
11 years ago
Using ldap for Oracle name resolution:

The web server needs the environmental variable TNS_ADMIN='Directory of tnsname.ora'. I use '/etc/tns_admin'. Confirm using the phpinfo() function.

There are three files needed in the TNS_ADMIN location: tnsnames.ora, sqlnet.ora and ldap.ora. If you are only using ldap, tnsnames.ora is not needed.

To sqlnet.ora add:
NAMES.DIRECTORY_PATH=(TNSNAMES,LDAP)

To ldap.ora add:
DIRECTORY_SERVERS=(ldap_fqdn_hostname:1575)
DEFAULT_ADMIN_CONTEXT=""
DIRECTORY_SERVER_TYPE=OID

For a quick and dirty ldap tnsnames server use tnsManager by Dave Berry. Oracle OID or Openldap can used, but are complicated to setup. tnsManager is a no brainer. The default port is 1575.

The order of values in NAMES.DIRECTORY_PATH from sqlnet.ora determines which look up 'adapter' is used first, in this case it is tnsnames.ora file and then ldap. I use ldap for general consumption and tnsnames.ora file to override ldap or entries that are not for general consumption.

If you have the full Oracle client you have tnsping. 'tnsping ORACLE_SID' will tell you what adapter you are using: 'Used LDAP adapter to resolve the alias'.

<?php
echo system("/PATH/tnsping ".$ORACLE_SID." 2>&1")."<br />";
echo
'TNS_ADMIN='.getenv('TNS_ADMIN');
?>

ISSUE:
For some reason PHP tries the HOSTNAME adapter first, and if the database name resolves in DNS, it will try connecting using the database name as the hostname with no SID or SERVICE_NAME defined. All other Oracle clients I have used will not try the HOSTNAME adapter unless it is listed in NAMES.DIRECTORY_PATH.
I have heard that LDAP look up does not work with older instantclients.
up
-7
jtacon at php dot net
13 years ago
If you upgrades the OCI8, be sure to use the latest oracle instantclient version, otherwise you can receive an "ORA-24315: illegal attribute type" when trying to connect due to incompatibility with some versions.

HTH,
Javier Tacón
up
-14
peter at goldthorp dot com
12 years ago
I started getting "ORA-12514: TNS:listener does not currently know of service requested in connect descriptor" errors when I upgraded my database instance from 10.2 to 11.2. For some reason it would not resolve the oci_connect calls with the Easy Connect syntax (easy connect calls from sqlplus were fine). I was able to workaround the issue by passing a tns connect string:

<?php
$db
= "(DESCRIPTION=(ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.XX.XXX)(PORT = 1521)))(CONNECT_DATA=(SID=XXXX)))";

$c1 = oci_connect("name","password",$db);
?>
up
-9
Anonymous
12 years ago
How to connect from PHP to an Oracle database using OID (Oracle Internet Directory):

OID is like a lookup index that contains connection strings for connecting to various databases. Without OID, a database connection string would be stored directly in the code settings and used by the PHP code to connect to a database. With OID, a lookup can be made to the OID LDAP to acquire the database connection string. Then the PHP code will use the acquired database connection string to connect to the database as before.

OID allows a DBA to manage/change which database server that an application uses without having to change any database settings in the PHP application itself or on the application server.

Here are the basic steps for PHP to connect to a database via OID:

- The DBA should provide you the connection information for the OID LDAP as well as the username/password for the database connection.
- Connect to the OID LDAP using the provided information
- Search for the appropriate LDAP record
- Get the connection string data from the record attribute, \&quot;orclnetdescstring\&quot;
- Close the LDAP connection
- Use the acquired connection string data to connect to the database as usual using the provided database username/password.

Here is basic sample code to do this:

// Get connection string from OID LDAP

$ds=ldap_connect($servername,$serverport); // Connect to ldap
$r=ldap_bind($ds); // Bind to ldap
$sr = ldap_search($ds, \&quot;cn=OracleContext,dc=___,dc=___,dc=___\&quot;, \&quot;cn=$sid\&quot;); // Run query
$info = ldap_get_entries($ds, $sr); // Get entries
ldap_close($ds); // Close connection

$dbconnectstring = $info[0][\&quot;orclnetdescstring\&quot;][0]; // Extract db connect string from ldap search result array

// Connect to database using acquired connection string from OID

$dbconnection = oci_connect ($username,$password,$dbconnectstring);
To Top